|
 
From mild to wild, we can build an injection
pump to suit your application. All pumps are bench flowed and
calibrated before leaving.
Stock Rebuild - A stock rebuilt pump
is just that. Stock fueling curve, stock governed RPM. We can do
a "turn up" of the max fuel screw if requested.
Turbo Calibration - As the name
implies, only good if the engine has either a factory or aftermarket
turbocharger. We readjust the fueling and timing curve to take full
advantage of a turbo, and normally raise the governed RPM to 3800. The
max fuel delivery capability of the pump is also raised. Although we
can do a turn-up on any rotary pump, the ideal pump to use is a "XX31"
model, found in the '93 - '94.5 idi. We can bring an "XX29" pump up to
the same fuel delivery, but the price will go up due to the extra machining
involved. Maximum gains are seen when a matched set of injectors are
used.
High Performance Pump - Complete
custom build depending on the application. Recommended for drag
racing/truck pulling. Capable of well over 4x the fuel delivery of a
stock pump, a large single turbo or twin turbos will be necessary, along
with a high pressure feed pump.
Stock Rebuilt Pump -
$415
Turbo Calibration Pump - $450 (if a
'93-'94 core is used)
High Performance Build - $call
Fuel Injectors - Brand new Delphi
units. Can be ordered either stock or matched to our Turbo Calibration
pump.
Stage 1 Injectors - If you're looking
for a little more power than can be had by just cranking up the pump these
are for you. Gains of 20+hp and 45+lbs ft. of torque can be seen when
combined with a healthy pump. Smoke is kept to a minimal except when
you stand on it and the idle remains unchanged. Injectors are
calibrated and matched before leaving. The injectors are sold on an
exchange basis so we will need your old running cores back or
there will be a core charge of $25ea. If you would like a set of
modified new injectors the price is $64ea outright.
Stock Injector ('83 - '91) -
$28ea
Stock Injector ('91 - '94.5) -
$32ea
Matched Injector -
$32ea
Stage 1 Injector -
$36ea exchanged / $64ea using new injectors
|